Map with: Google Map, or OS Explorer Map from Streetmap.co.uk

Other Sites Within 500m

Moffat's Shaft  Katystaklin Mine (Park's Shaft)  Manor Slack Hass [Shaft]  Manor Slack Hass [Shaft] (II)  Manor Slack Hass [Shaft] (III)  Katystaklin Mine (Hopes Shaft)  Manor Slack Hass [Shaft] (IV)  Katystaklin Mine (Waygate Shaft)  Katystaklin Mine [Sump Shaft]  Manor Slack Hass [Shaft] (V)  Manor Slack Hass [Trial]  Katystaklin Mine [Sump Shaft] (2)  Katystaklin Mine (Wilsons Shaft)  Katystaklin Mine (Low Level Mouth)  Muir's Vein [Shaft]  Katystaklin Mine (Stewarts Shaft)  Katystaklin Copper Mine  Muir's New Shaft  Katystaklin Mine (Stewarts Level Mouth) [2]  Katystaklin Mine (Stewarts Level Mouth)  Raik Vein [Shaft] (III)  Raik Vein (Frasers Shaft)  Raik Vein (Watson's Shaft) 

 Go to the Main Scottish Cave and Mine Database Search Page

Katystaklin Mine

Leadhills, Manor Slack Hass, Lanarkshire.

NGR:NS 89200 14050
WGS84:55.40782, -3.75149
Length:Not recorded
Vert. Range:Not recorded
Altitude:457 m
Geology:Lead, Portpatrick Formation - wacke
Tags:Mine, Shaft, Archaeo
Registry:second

Mine (Lead).

Situated at the intersection of the Katystakelin, Roanburn & Horner's veins. Given coordinates are for the shaft situated ca. 40m NW of Moffat's Shaft. It was referred to as the 'Katystake Lin Shaft', & also the Dickson's Shaft. This is located on the Katystaklin Level that passes through the three aforementioned veins and surfaced on the N bank of the Shortcleugh Burn to the SE [site #10249]. A large crater marking the shaft location is obvious on satellite imagery, as are the spoil tips (combined with those from Moffat's Shaft). This mine forms just one relatively small part of a highly extensive complex of lead workings that includes the Glengonnar Mine.

- - -

"Roanburn Vein trends about 15° west of north, shades to the east at 60°, and has been traced for a distance of over half a mile. Along the greater part of its course it is associated with a felsite dyke, which is cut through and brecciated by some of the movements to which the vein has been subjected. The vein has been worked to a fair extent, and an adit-level was formerly driven along its course nearly as far as Deadburn. At one point (between Hope's and Patterson's Shafts) it contained a good deal of barytes with quartz and some galena up to 2 in. in thickness. Just south of here, and near Moffat's Shaft, the workings branch off into another vein which trends 30° west of north, consists mainly of barytes, and is clearly seen to be cut by the Roanburn Vein, though the amount of displacement cannot be made out. In all probability this vein is the Katystaklin Vein which further to the south has yielded a small amount of galena between the Katystaklin and Poutshiel Levels. Horner's Vein is the continuation of Jeffrey's Vein, and at this locality has been worked on a fair scale in both directions. It hades slightly to the south-west, and consists mainly of brecciated country-rock with barytes and some dolomite." [Wilson, 1921]

Alternative Names: Jackson's Shaft, Dickson's Shaft, Katystake Lin Shaft, Katy Staklin Mine, Katie Stacklin Mine, Katy-Stake-Lin Mine, Katystake-Lin Mine, Manorslack Gutter Lead Mines

Notes: Not to be confused with the Katystaklin (Copper) Mine [site #10134] that is also referred to as Katystaklin Mine by some sources (e.g. Landless, 2014).

The Roanburn, Katystaklin & Horner's/Jeffrey's veins and levels are all located further N of the original vague coordinates at [NS 888 133]. The given coordinates are for the shaft located at the intersection of these veins. Originally claimed to be in Dumfriesshire but coordinates given are definitely in Lanarkshire. Joined to the wider Leadhills mine complex, but only a few metres of this system (on the West Stayvoyage Vein) extends into Dumfriesshire.

Links and Resources:

This entry was last updated: 2026-04-27 12:35:10

Errors or omissions in this information? Submit corrections/additions/comments for this entry to the registrars.

All database content Copyright 2026 Grampian Speleological Group.
Web Registry software by Matt Voysey.